Coating Products and Supplies
Tape Products
RENWRAP®
TAPECOAT®
TAPECOAT
has developed a range of protective coatings to meet the needs of
industry wherever corrosion and abrasion are a problem on steel,
wood and concrete surfaces.
 TAPECOAT
H50 Gray™
- A new technology that features a cold-applied tape with
multiple-alloy polymers for use both above and below ground.
- Designed to protect the pipe from corrosion and electrolysis.
- With an integrated primer, Tapecoat H50 Gray is resistant
to UV rays, thermal expansion, impact and abrasion.
- Liquid primer NOT required.
TAPECOAT CT
- a 35 mil cold-applied tape coating with a 7 mil polyethylene
film backing and 28 mils of adhesive, for ambient temperature
below grade application.
- Appropriate for coating small to moderate size pipe with
a single layer - a 50% overlap may be preferred when coating
larger diameter pipe.
|
 DENSO
Tapes and Primers
Denso Tapes and Primers offer a complete corrosion protection system
with a sealant and a water proofing system formulated from petrolatum
in the form of pastes, mastics and impregnated tapes and cords.
 Royston Mastics
Royston Mastics offer high performance coatings that have outstanding
resistance to cathodic disbondment. Easy to apply, fast setting and
low cost.
To
order specifications click here
back
to top
POLYGUARD
RD-6 is a non-shielding coating. This means that if the coating ever becomes disbonded, the pipeline is still protected because cathodic protection currents can reach the disbonded area.
The geotextile fabric backing of RD-6 does not shield cathodic protection currents.
back
to top
CANUSA Shrink Sleeves 
- Heat-shrinkable wraparound sleeves designed for corrosion protection of girthwelds on buried pipelines
- Easy installation – the sleeve is wrapped around clean preheated pipe and a flexible closure forms the sleeve into a tube; the sleeve is then torch-shrunk around the pipe
- Compatible with all standard pipe coatings and outer jackets
back
to top
 CANUSA Perp Meltstick
back
to top
 CANUSA CPRN Patch Material
- Coating Repair Patch
- Repair systems for damaged mill-applied PE coating
back
to top
J Rollers
- Specially designed for shrink sleeves, The rubber
roller has no axle projection one-on-one end for
scratchless flush work. This unit features a
lightweight aluminum
back
to top
 Exact Torches
- For Shrink Sleeves
- Extensions available in different sizes
back
to top
Canusa - Standard Products
back
to top |
General
Utility Tape 
About Proline